Blog

Find out the differences between different gasket types & their possible applications

By April Grams on 29 August 17 Article,Chemical Processing,Oil & Gas

 

Understanding the Difference Between Gasket Types dreamstimeextralarge_36102917

As we like to say, where there are pumps and valves, there are also gaskets.  Gaskets are critical components in fluid conveyance systems. There is a wide variety of types and materials that they can be made from.  Many of our most commonly-asked questions revolve around which gaskets are right for which situations.

While far from an inclusive list, we wanted to quickly touch on some of the most common gasket types and materials we are asked about.

 

A Quick Guide to Gasket Types:

Spiral Wound Gasket

Spiral-wound gaskets utilize two sealing elements – the winding and the filler – the winding behaves like an energized spring against the flange surfaces while the filler seals the imperfections between the two surfaces. An outside ring is standard in flange applications to center the gasket between the bolts and help prevent blowout.  Stainless steel inner rings are often added to prevent the windings from buckling inward potentially contaminating the media. They combine high strength with reliable sealing capacity. They function as well in low pressure and temperature applications as they do in more extreme environments, but are more expensive to produce compared to compressed fiber and elastomeric gaskets.

Sheet Gasket

The simplest type of gasket, this is made from common rubber elastomers or compressed fiber and can be easily cut into virtually any size with any configuration. While often suited for low pressure environments, sheet gaskets are an ideal solution for industry standard applications like creating a reliable seal between flanges and fittings for fluid movement.

Elastomer Sheet Gasket

Most rubbers are relatively inexpensive and can be easily cut into shapes on demand. Dichtomatik stocks a variety of sheet materials to meet our customers’ requirements – including SBR, Neoprene, EPDM, NBR, and FKM.

Aramid Fiber Sheet Gasket

Aramid fibers are a particularly strong and heat-resistant form of synthetic fiber which can have exceptional strength when tightly-woven while being low-weight. They also are highly resistant to impact, abrasion, or chemical erosion.  However, they are also absorptive and have poor compression properties. A broad variety of compressed fiber sheets are available; they are versatile and inexpensive. They can generally handle maximum temperatures and pressures over 700°F and 1,000 PSI. 

Elastomeric Molded Gasket

Also known as press-in place gaskets, these all-elastomer gaskets are custom-shaped and are designed for applications where there is a groove that positions the gasket Gasketbetween components to optimize the sealing performance in the groove. They are easy to install, require no adhesive and are self-retaining and adaptable.

Custom-Made Gaskets

For all other applications, there are custom-made gaskets.  Dichtomatik is a world leader in sealing solutions, fully capable of delivering gaskets on demand, made to-spec for any application and made from any possible material, design, and other gasket materials including rubber, flexible graphite, PTFE, FKM, and Kevlar®.

For an in-depth consultation on your next project’s sealing needs, connect with a Dichtomatik engineer today.

Leave a Reply

Your email address will not be published. Required fields are marked *